石家庄非标流水线如何选购才物超所值

作为生产厂家，一台好的石家庄流水线,石家庄非标流水线关系着生产的效率，选购流水线设备时，要注意流水线的形式是否符合生产的要求，选购流水线其次要注意石家庄流水线,石家庄非标流水线的各部分的功能及作用，这样的流水线设备才是企业真正的需要。

As a manufacturer, a good assembly line equipment is related to the efficiency of production. When purchasing assembly line equipment, we should pay attention to whether the form of assembly line meets the requirements of production. When purchasing assembly line equipment, we should pay attention to the function and function of each part of assembly line. Such assembly line equipment is the real need of the enterprise.

选购石家庄流水线,石家庄非标流水线时应了解流水线形式：

When purchasing assembly line, you should know the form of assembly line:

1.按功能分类：

1. Classification by function:

①生产流水线

① Production line

②输送流水线

② Conveying line

2.输送形式：

2. Conveying mode:

①平面直线传输流水线

① Plane linear transmission pipeline

②各种角度平面转弯传输流水线

② Transmission line of plane turning at various angles

③斜面上传流水线

③ Ramp upload pipeline

④斜面下传流水线

④ Ramp down flow line

选购流水线时应了解流水线各部分组成及功用

When purchasing assembly line, you should know the composition and function of each part of the assembly line

1.动力：石家庄流水线,石家庄非标流水线动力部分的主要组成为：马达、齿轮减速箱、手动变速器、变频器、机架机座和电器等组成。

1. Power: the main components of the power part of the assembly line are: motor, gear reducer, manual transmission, frequency converter, frame frame frame, electrical appliances, etc.

马达部分主要就是功率大小，生产厂家选购流水线时应根据线体的长短、输送带的宽窄、工件密度及大小等情况来配置。

The motor part is mainly about the power. The manufacturer should choose the assembly line according to the length of the line body, the width of the conveyor belt, the density and size of the workpiece, etc.

而手动变速器、变频器为选购流水线时的配件选择。两者只用一个就可以了。手动变速器比较经济，和变频器相比主要缺点就是：噪音大、变速范围小、由手动去作机械式调整—危险！

The manual transmission and frequency converter are the accessories of the assembly line. Just one for both. Manual transmission is more economical, and the main disadvantages compared with frequency converter are: large noise, small speed range, mechanical adjustment by manual - dangerous!

2.机身：石家庄流水线,石家庄非标流水线机身部分的主要组成为：导轨、支架、滚筒、输送带、脚杯、托板、等组成。

2. Body: the main components of the assembly line body are: guide rail, bracket, roller, conveyor belt, foot cup, pallet, etc.

其中托板为选配件，其他几项均为组成基本线体的必须配件！这些配件的规格、数量等均由线体的长度决定。

Among them, the bracket is an optional part, and other items are necessary parts to form the basic line body! The specifications and quantity of these accessories are determined by the length of the line body.

机身部分更大的差别就是材料。该部分配件的材质将在很大程度上决定整套设备的价格！所以，在选购流水线时要充分考虑自己的使用情况。机身部分的材料常用的有：碳钢、铝合金、不锈钢等！价格为碳钢更低，不锈钢更高。

The biggest difference in the fuselage is the material. The material of this part of accessories will largely determine the price of the whole set of equipment! Therefore, when purchasing assembly lines, we should fully consider our own use. Fuselage part of the commonly used materials are: carbon steel, aluminum alloy, stainless steel and so on! The price is the lowest for carbon steel and the highest for stainless steel.

输送带目前在电子行业普遍采用的是2㎜、3㎜厚绿色PVC防静电输送带；塑胶行业采用的绿色PVC防静电输送带和不锈钢网带。

At present, the conveyor belt is generally used in the electronic industry as 2mm and 3mm thick green PVC anti-static conveyor belt; the plastic industry adopts green PVC anti-static conveyor belt and stainless steel mesh belt.

3.石家庄流水线,石家庄非标流水线工作台：流水线工作台常见形式有两种，独立和条。用户可根据自己使用习惯和需要选购流水线。

3. Worktable: there are two common forms of assembly line worktable: independent and strip. Users can choose the assembly line according to their usage habits and needs.

4.灯架、照明：灯架是安装照明、仪表台及指导书的必要配件，材料和机身相同。用户选购流水线时，照明用灯管也可根据需要及兴趣选择。

4. Lamp holder, lighting: the lamp holder is a necessary accessory for the installation of lighting, instrument panel and instructions, and the material is the same as the fuselage. When choosing assembly line, lighting lamp can also be selected according to need and interest.

5.石家庄流水线,石家庄非标流水线仪表台：流水线仪表台宽度与机身配套，长度一般与线体等长。

5. Dashboard: the width of the assembly line dashboard is matched with the body, and the length is generally equal to the length of the line body.

6.石家庄流水线,石家庄非标流水线指导书：底板通常为有色亚克力板，面板为透明有机玻璃。

6. Instruction: the bottom plate is usually colored acrylic plate, and the panel is transparent organic glass.

7.石家庄流水线,石家庄非标流水线插座：为操作过程中的电动工具及仪表仪器安装。

7. Socket: for installation of electric tools and instruments during operation.